Refrigeration Technician
Company: Sysco
Location: Northampton
Posted on: November 6, 2024
Job Description:
JOB SUMMARYThis is an Operations position responsible for
managing the activities associated with refrigeration repair on
industrial refrigerated storage equipment ranging from 100 HP to
3,000 HP, general maintenance and repair of the regional facility
refrigeration systems, minor repair of electrical devices. Ensure
assets (Refrigeration/HVAC/Electrical systems) are managed in
accordance with the following: IIAR (International Institute of
Ammonia Refrigeration), ASHRAE (American Society of Heating,
Refrigerating and Air-Conditioning Engineers), ASME (American
Society of Mechanical Engineers), EPA, OSHA and applicable State
and Local Codes. The ideal candidate will have HVAC/R schooling,
RETA Certified Industrial Refrigeration Operator (CIRO)
certification, universal EPA, and at least six years' experience
with service/maintenance of HVAC / R, and large ammonia
refrigeration units.RESPONSIBILITIES
- Perform required inspections and preventive maintenance of
refrigeration storage equipment ranging from 50 HP to 3,000 HP
- Use working knowledge of screw and reciprocal compressors,
electrical troubleshooting all common types of ammonia central
systems, & control/alarm systems to perform inspections and
preventative maintenance as required
- Knowledge of controls and electric (high and low voltage)
- Knowledge of PC (personal computer) & PLC (programming logic
controller) based master refrigeration control systems
- Maintains the freezer and cooler ammonia system through
scheduled preventative maintenance activities includes the areas
listed below to ensure the full functioning of all refrigeration
units, checking, draining and filling oil levels as needed, Oil
analysis, Filter changes, Sensor calibration, Transducer
calibration, Compressor alignment, Checking, adjusting, or
replacing all belts as needed, Checking for ammonia leaks on roof
above freezers or around the units themselves, Checking compressors
and cycle operation of each, Checking condensers and cycle
operations of each unit
- Responsible for logging time and materials into the
computerized maintenance management system (CMMS) on a daily basis
in the form of work orders, P.M.s, etc.
- Checking, changing or filling water treatment chemical
levels
- Oversee and manage Refrigeration, Electrical, and HVAC systems
including monitoring and trending, troubleshooting and repairs
(Compressors, condensers, fans, heating, cooling, contactors,
motors, microprocessors, frequency drives, etc.), leak
detection
- Conducting required inspections and reporting
- Glycol underfloor warming system knowledge
- Evaluating and implementing energy management strategies
- Ensure product integrity is maintained through temperature
monitoring & control
- Evaluating and reporting equipment condition
- Completes small electrical repairs and welding projects as
needed, to reduce contract or purchase of needed services
- Responsible for daily communication of all pertinent
information regarding system operation and maintenance to
departmental management and maintenance teams
- Responsible for housekeeping and cleanup of refrigeration
machine rooms, refrigeration maintenance areas, and all project
areas on a daily basis
- Required to interpret and understand plans and specifications,
schematics, operating and maintenance manuals, etc. for systems
being overseen
- Conducts audits ensuring all required inspections and
documentation are completed accurately (including but not limited
to food safety documentation, ePSM, PSM (Process Safety
Management), etc.)
- Checking condition of the freezer and cooler curtains.
- Suggests efficiency ideas, cost reduction measures and assists
with the implementation of changes within the facility maintenance
dept.
- Works require exposure to extreme cold and heat and working
around ammonia, noise, dirt, dust, paint, grease and high voltage
wires.
- Demonstrate an understanding and adherence to all work safety
policies, procedures, and governing requirements
- Assist management in developing standard operating procedures,
training tech I & II positions, daily work schedules
- Duty cycles for all repairs and maintenance for refrigeration
and HVAC systems
- Assist in managing outside mechanical and refrigeration
contractors conducting service, repair and new contract work
- Assist management in the creation of budgets for individual
projects, yearly capital, and yearly operating expenses
- Participate in departmental on-call program, as designated
- Available to travel on short notice
- Ability to work unsupervised or with limited instruction
- Maintain and manage truck inventory and / or job tool boxes in
an accurate, neat and orderly manner as well as adhere to vehicle
maintenance program guidelines
- Utilize computerized maintenance management system (CMMS) on a
daily basis to order necessary parts, devices, etc. to properly
repair or complete assigned work orders, following department
procedures
- Maintain all tools and equipment in clean, safe, working
order
- Maintain adequate inventory of related parts to perform
assigned duties
- Maintain technical skills and required certifications to
perform job duties
- Adhere to all safety requirements and wear the proper Personal
Protective Equipment required by the job
- Respond to emergency situations to ensure employee and facility
safety
- Champion overall safety in the department
- Comply with OSHA, and other local, state and federal
regulations
- Cooperate and collaborate with the Organization's leadership to
champion and meet the strategic goals of the Organization's
system
- Adhere to Organization and the Facilities Department policies
and procedures including appropriate attire, grooming, and
attendance
- Serve on departmental and/or organizational committees or focus
groups as requested and needed
- Interact effectively, build relationships, and demonstrate a
high level of cooperationQUALIFICATIONSEducation
- High School diploma or general education degree (GED);
- HVAC / R tech school preferredExperience
- Six years of industrial HVAC / R experience
- Two years' experience with anhydrous ammonia
(R717)Certificates, Licenses, and Registrations:
- Must possess a valid state Driver's License and provide proof
of liability coverage meeting Company standards.
- Complete a Sysco approved the defensive driving program
- HAZWOPER 24 hrs Training required.
- Incident Command System trained
- Respirator Fit Test & Physical (Annually)
- Obtain a Powered Industrial Equipment Certification from Sysco
within 3 months
- Universal EPA certification
- RETA Certified Industrial Refrigeration Operator (CIRO)
certification
- Obtain RETA Certified Refrigeration Energy Specialist (CRES)
certification within 6 months of employmentProfessional Skills
- Ability to read, analyze and interpret general business
periodicals, professional journals, technical procedures, or
governmental regulations. Ability to write reports, business
correspondence, and procedure manuals. Ability to effectively
present information and respond to questions from groups of
managers, clients, customers, and the general public
- Ability to add, subtracts, multiply, and divides into all units
of measure, using whole numbers, common fractions, and
decimals
- Ability to solve practical problems and deal with a variety of
concrete variables in situations where only limited standardization
exists. Ability to interpret a variety of instructions furnished in
written, oral, diagram, or schedule form
- Demonstrate knowledge of Spreadsheet software and Word
Processing software, and ability to learn Sysco technology software
and programsPhysical Demands
- While performing the duties of this job, the associate is
regularly required to talk or hear.
- The associate is frequently required to stand; walk; sit; use
hands to finger, handle, or feel; reach with hands and arms and
climb or balance.
- The associate is occasionally required to stoop, kneel, crouch,
or crawl.
- The associate must occasionally lift and/or move up to 100
pounds.
- Specific vision abilities required by this job include close
vision, distance vision, color vision, peripheral vision, depth
perception and ability to adjust focus.
- Must be able to wear a respirator and pass the fitness
test.Working Conditions
- While performing the duties of this job, the associate is
occasionally exposed to wet, hot, extreme cold and/or humid
conditions; and moving mechanical parts and may be required to work
in confined spaces.
- The associate works non-traditional business hours including
evenings, nights, weekends, holidays and on-call.
- The associate will be required to travel to other Operating
Companies or the corporate office as business needs dictate (i.e.
training, business continuation, etc.).
- The associate is occasionally exposed to high, precarious
places and confined spaces.
- The associate is occasionally exposed to fumes or airborne
particles.
- The noise level in the work environment is usually
moderate.
Keywords: Sysco, Passaic , Refrigeration Technician, Engineering , Northampton, New Jersey
Didn't find what you're looking for? Search again!
Loading more jobs...